報告內容：

Report content

1：產品應用范圍對比Comparison of product range

2：除油效率測試Oil removal efficiency test

3：待缸時間應用對比Usage time contrast

4：能源節約對比Energy conservation comparison

5：節約資金計算Capital saving calculation

6：環保對比測試Environmental protection contrast test

7：穩泡能力測試Stable foam test

8：使用廠家評價Using manufacturer evaluation

1：產品應用范圍對比Comparison of product range

市場上需要加熱的除油粉分為兩種；一種是適用于銅材，另一種適用于鐵基材料兩者不可混于一起適用。如果混用無論是陰極脫脂還是陽極脫脂極易造成對應金屬離子吸附在鍍件基材上而造成密著性不良。市場上需要加熱的除油粉不可作為熱脫除油及滾鍍，掛鍍適用。

Hp-102常溫除油粉既適用于銅材也適用于鐵基材料同時可作為冷熱脫使用。應用范圍比較廣，不但連續電鍍可以使用，滾鍍，掛鍍都可以有最佳效果使用。

There are 2 kinds of heating oil removing powder at the market, one is apply to copper product,

the other is apply to iron product, they can’t be mixed. If they are mixed then whether cathodic degreasing or anode degreasing the metal ion will be adsorbed on artifacts, it can be caused tightness bad. At the market the heating oil removing powder can’t be apply to barrel plating and rack plating.

Hp-102 normal temperature oil removing powder is apply to the copper product and iron product, also the barrel plating and rack plating can be used.

2：除油效率測試Oil removal efficiency test

Hp-102常溫除油粉的組分基本是新材料，其生產理念跨越傳統思維模式。組分中的表面活性劑是竑鎏公司自行研發生產具有較強的脫脂能力(無毒、無味)。除油效率是市場上加熱的除油粉一倍以上。

The most component of Hp-102 normal temperature oil removing powder are new material, and it’s production concept transcend traditional. The surface-active agent of the product is created by HongLiu company, it’s powerful and no poison/smell. It’s efficiency is more double than others.

用機油、潤滑油、柴油1:1:1混合涂抹赫試片上

 uniform mixing engine oil, lubricating oil, diesel oil for 1:1:1

3：待缸時間應用對比Usage time contrast

由于Hp-102常溫除油粉的組分是新材料，其待缸時間是市場上需要加熱的除油粉一倍以上。市場上需要加熱的除油粉正常待缸時間（24小時不間斷生產）為一周，最多達到二周，Hp-102常溫除油粉最低待缸時間（24小時不間斷生產）為二周，正常待缸時間為四周以上。Hp-102常溫除油粉待缸時間比市場上需要加熱的除油粉待缸時間多出二周以上。

Owing to the Hp-102 normal temperature oil removing powder is new material, the using time is more double than heating oil removing powder at the market. The heating oil removing powder normal using time is one week(working 24 hours) ,it’s limit is two weeks. Hp-102 normal temperature oil removing powder’s lowest using time is two weeks(working 24 hours),it can be more than four weeks.

4：能源節約對比Energy conservation comparison 如圖所示As shown in the figure:4-1 

5：節約資金計算Capital saving calculation 如圖所示As shown in the figure:5-1 

 6：環保對比測試Environmental protection contrast test

市場上需要加熱的除油粉

a: 使用溫度最低在55℃與槽外產生溫差就形成堿氣而污染生產車間環境---- 嗆人的氣體使人

喘不過氣，從而影響員工身體健康。

b: 由于溫差形成堿氣在機架、地面及其他設備而凝結產生白色或乳黃色堿垢，不但；影響環境清潔還腐蝕設備。在地面凝結還會造成人員滑到而摔傷，從而造成工業傷害。

c: 除油粉的堿性含量較強在在55℃的溫度極易灼傷操作人員的手。

Hp-102常溫除油粉不會產生溫差就沒有堿氣，所以；Hp-102常溫除油粉不會產生a、b及c的現象。

Heating oil removing powder at the market

a: The minimum working temperature is 55℃,it formed the temperature difference with outside then the alkaline gas contaminated workshop environment. The alkaline gas is chocking and made the worker breathing hard, so it affect health.

b: The alkaline gas condenses to white or cream-like color alkali scale on frame/ground and machine. The alkali scale not only affect environment clear but also corrode equipment. The condensate may be make worker slip cause their safety.

c: It contact high alkalinity and the temperature is 55℃ so the operator’s hands easy be scald.

There is no alkaline gas because no temperature difference if use Hp-102 normal temperature oil removing powder. So above the a/b/c will not happen.          

7：穩泡能力測試Stable foam test

市場上需要加熱的除油粉使用的表面活性劑都是商售的泡沫活性極強的商品，他們?yōu)榱朔€(wěn)住泡沫使用大量含硅的消泡劑，大量含硅的消泡劑使用嚴重影響除油效果和鍍件親水能力及槽液使用周期。

Hp-102常溫除油粉的表活部分是我們公司自行生產的產品，所以；我們的產品不使用含硅的消泡劑。我們的產品在使用過程中不會產生泡沫，穩泡能力極強。屬于離開電子核即破泡型態。

The heating oil removing powder at the market contact the surface active agent that has strong foaming property. The manufacturer add the defoamer(has silicon) for except the foam. The defoamer affect oil removing effect and hydrophilicity serious and using cycle.

The surface active agent of Hp-102 normal temperature oil removing powder is made by our company, it has no silicon in it. There is no foam at using. The surface active agent is a kind of foam rupture when leave electron nucleus.        

8：使用廠家評價Using manufacturer evaluation

我們產品現在正在使用的廠家有：

Our products the manufacturers are using it representativeness Customer

中山朝陽電鍍有限公司  Zhongshan Chaoyang electroplating Co., Ltd.

富圖電鍍有限公司  Photolink electroplating Co. Ltd.

藝海電鍍有限公司  Yihai Electroplating Company Limited

鑫鋆電鍍廠   Xin Jun electroplating factory   等多家廠商使用，每家廠商使用都得到了一致好評!

他們認為此等產品的開發成功堪稱是電鍍行業的一次深刻技術變革，為該行業的發展起到了推動作用，真正做到了；節能 環保。

And other manufacturers use ，The use of every vendor has been well received!

They believe that the development of these products is successful，Electroplating industry is a profound technological change。For the development of the industry has played a catalytic role，Really done; energy-saving environmental protection